How to set up Telemetrix

Installation

There is almost no difference installing a Telemetrix panel to any other dual pump control panel. If it's 230v, on the isolator, use L1 for live and L2 for neutral. If it's 400v, follow L1, L2, L3 and safely terminate the neutral.

 

Earth points on the terminals can be used plus the earth studs inside the panel can be used.​

​

Connect the panel via WiFi

You will need your WiFi name and password.  The panel router will take 5-10 minutes to turn on.

 

1. On your device connect to the panel WiFi called 'TELEMETRIX Pxxxxxx'. The password is on the label on the inside of the door.

2. Now open your device browser and enter '192.168.187.1'

3. Select the client's WIFI network you want the Telemetrix to connect to, and enter the client's WIFI password.

4. Click connect and allow 2 minutes for the router to restart.

​

To connect the panel via SIM card - put the SIM card into the router. 

​

To connect the panel via LAN ethernet cable - plug it into the broadband.

​

Once the panel is connected to the internet using one of these methods, the contact details provided will start receiving these notifications:

• Pump 1 Trip

• Pump 2 Trip

• High Level Alarm

• Panel offline (power fail)