Skip to content
G&G Controls, The Panel People
Call G&G Controls on 01782 280577
Company and industry

Interview with Direct Pumps & Tanks

By Tristan Newton, Commercial Director · 26 July 2024 · 1 min read

We recently had the privilege of speaking to Daniel Challans, the Head of Sales and Marketing for Direct Pumps & Tanks where we spoke about what DPT are working on at moment and their upcoming R&D project.

Thanks to DPT for hosting us. www.directpumpsandtanks.co.uk

Written by the engineers at G&G Controls, a UK control panel manufacturer in Stoke-on-Trent. For general guidance only; consult a qualified professional for advice on your own installation.

Up next

The pros and cons of building your own panels

The question of whether having your own panel shop would save money is worth exploring. Firstly, it’s important to consider whether it fits your business model. If you’re a manufacturing company already set up with warehouse staff, stock, manufacturing schedules, etc., then it may be a good fit - ju

Related panel

If this article is about a problem you have on site, this is the panel we would suggest.

G&G engineers building control panels on the factory floor in Stoke-on-Trent

Equipment manufacturers

OEM control panels

Fixed BOMs, one standard platform for your range, and reliable UK production at 5 to 200 panels a month.

Fixed unit price per platform and option block, agreed at design stage and held across the programme.

View OEM control panels

Ask an engineer

A question about this article or a panel for your site. We reply during working hours.

Or call 01782 280577

What happens next. We will come back with a proposal and, if it suits, an invitation to visit the factory in Stoke-on-Trent. We reply during working hours, Monday to Friday, 7am to 5pm.

Your details go to our sales team by email and are used only to answer this enquiry. No mailing list, nothing shared. Privacy policy.

More on company and industry

Standardising a control panel platform: how OEMs take cost and lead time out

Equipment makers who order panels every month usually order too many variants. How to design one platform with option blocks, what it saves, and how to move a range across to it.

21 August 2026 · 4 min read

G&G Controls Live: the Ask the Experts session

Our open question-and-answer session on pump controls, held in March 2025: what we covered, where the answers were written up, and how to come to the next one.

26 March 2025 · 1 min read

Controlling Water, why go custom?

Why an irrigation contractor stopped buying off-the-shelf controllers and moved to custom-built panels: what standard kit could not do, and what changed once the panel matched the job.

22 November 2024 · 2 min read

Latest from the knowledge hub

Building services and BMS

Free-issue controllers: how it works and what we need from you

Sending your own Trend, Distech, ISMA or Tridium controllers to be fitted into a panel: what to send, when, how it is labelled and tested, and who is responsible for what.

14 August 2026 · 4 min read

Building services and BMS

What's inside a BMS outstation panel

Power supplies, surge protection, a network switch, the controller and the terminals: what each part of a BMS panel does, and why the bits around the controller matter as much as the controller.

7 August 2026 · 4 min read

Building services and BMS

How to write a BMS points list that gets an accurate quote

A points list is the one document that turns a BMS panel enquiry into a price and a drawing. What to put in it, what to leave out, and a template to start from.

31 July 2026 · 4 min read

All 66 articles →